SUBJECT CODESUBJECT NAMETensile test in metalsLAB # 4Student Name/ID:Date: xx,yy,zzTABLE OF CONTENTSObjectivesTheoryProcedureAnalysisResultsConclusionsReferencesObjectives:The objectives of this lab is to know the principles of the universal testing machine and to knowthe tensile test results.We will be evaluatingUltimate StressPercent ElongationPercent Reduction per AreaElastic ModulusModulus of toughnessFracture StressTheory:As we know that tensile test are carried out to know about the material and its properties.By applying the force to any material or we can say subjecting some force to it we can examinethe characteristics of that material. UTS or we can say Ultimate Tensile stress is the maximumstress that can be calculated in order to know the limit of stress bore by the material. The formulafor UTS is the force exerted per unit area. =For calculating the Fracture stress we know that it is the point where the stretching orpulling of material fails and results in permanent deformation or breakage. Studies also show thatFracture stress is equal to UTS.FS=UTSFor calculating the percentage elongation or ductility of a material, we divide thespecimen length for maximum elongation by the initial length (specimen).Percentage elongation= Lx-Lo/L0= For calculation of the Percentage reduction area, we use this formula:= ...

To Order an Original Plagiarism Free Paper on the Same Topic Click Here

### Other samples, services and questions:

When you use PaperHelp, you save one valuable — TIME

You can spend it for more important things than paper writing.